CLI Commands
show
show (router) stp
The show (router) stp command displays the current Spanning Tree Protocol settings for the
specified Router card.
Syntax:
Example:
> show 5 stp
SLOT 5:
Spanning Tree Protocol Settings for Router:
{rtr_card-addr}
The slot number (1-6) that contains the Router (IP or CMG) card.
show (router) syslog
The show (router) syslog command displays the current Syslog setup for the Router card.
Syntax:
Example:
> show 5 syslog
SLOT 5:
Syslog Settings for Router:
{rtr_card-addr}
The slot number (1-6) that contains the Router (IP or CMG) card.
5-228
show {rtr_card-addr} stp
show 5 stp
Spanning Tree:
Bridge Hello Time:
Bridge Max Age:
Bridge Forward Delay:
Bridge Priority:
show {rtr_card-addr} syslog
show 5 syslog
Syslog:
Facility:
Level:
Server IP Address:
Enabled
2 seconds
20 seconds
15 seconds
32768
Enabled
20
3
192.168.3.3
Compact T1 - Release 6.1