Table of Contents
Advertisement
set user
Use the set user command to modify attributes for a specific user that have been created with
the add user command.
set user level
Use the set user level command to set the user access level.
Syntax:
Example:
{"user-name"}
The user-name is a user ID to add to the system. Text is a single word, with no blank spaces
and must be enclosed in quotes.
{1| 2| 3}
Sets the level of access.
Level 1
Level 2
Level 3
set user password
Use the set user password to set the password for this user.
Syntax:
Example:
{"user-name"}
The user-name is an existing user ID in the system. Text is a single word, with no blank
spaces and must be enclosed in quotes.
Compact T1 - Release 6.1
set user {"user-name"} level {1|2|3}
set user "paul" level 2
Manager has full access to ALL commands. Typically, there is only one
designated user at this level
Operator has access to all commands except for the add user and set user
commands
Monitor (read only) has access to commands that display reports and status
set user {"user-name"} password
set user "john" password
New Password: **
New Password again: **
CLI Commands
set
5-201
Advertisement
Table of Contents
