Table of Contents
Advertisement
connect (card-trunk) (card-trunk)
Use the connect (card-trunk) (card-trunk) command for configuring card-to-card WAN
cross-connects between two Router cards or between a Router card and a V.35 card.
Syntax:
Example:
Example:
{rtr_trunk-addr}
The Router (IP or CMG) trunk address is in the form {slot:port:trunk}.
slot
port
trunk
{v35-addr}
The V.35 trunk address is in the form {slot:port}.
slot
port
{ds0-number}
The number of DS0s to connect (1-60).
Compact T1 - Release 6.1
connect {rtr_trunk-addr} {rtr_trunk-addr|v35-addr}
{ds0-number}
Use the disconnect command to delete connections.
connect 3:1:2 4:1:3 12
Connects WAN trunk number 2 of a Router card in slot 3 to WAN trunk number
3 of a Router card in slot 4 using 12 DS0s.
connect 3:1:2 5:1 12
Connects WAN trunk number 2 of a Router card in slot 3 to port 1 of V.35 card
in slot 5 using 12 DS0s.
The slot number (1-6) that contains the Router card.
Port number.
Trunk number for this port, 1-24.
The slot number (1-6) that contains a V.35 card.
Port number (1-2).
CLI Commands
connect
5-39
Advertisement
Table of Contents
