T1 Controller Card
LEDs
LEDs
The T1 Controller has a set of six LEDs you can use to troubleshoot your Compact T1.
The table below describes each LED.
0 (Off) 1 (On)
6-10
LED
State
MAJOR
Off
Red
MINOR
Off
Yellow
LOCAL
Off
Green
ACO
Off
Yellow
T1-1 and
Off
T1-2
Green
Red
Yellow
Flashing Green
Flashing Red
Flashing Yellow
Description
No major alarms present
Major alarm present
No minor alarms present
Minor alarms present
Remote mode (DIP switches disabled)
Local mode (DIP switches enabled)
Normal mode. No alarms are being
suppressed.
Alarm cutoff active. One or more active
alarms suppressed.
Off line
Normal
Loss of Signal (LOS) detected
Bipolar Violation (BPV) detected
Loopback active
Loss of Frame (LOF) or Alarm Indication
Signal (AIS) detected
Yellow alarm (Remote Alarm Indication)
detected.
Compact T1 - Release 6.1