Table of Contents
Advertisement
show (router-lan) collision
The show (router-lan) collision command displays the current LAN collision alarm settings
for the specified Router card.
Syntax:
Example:
> show 5 "Adit50" collision
SLOT 5:
LAN Collision Threshold Settings for Adit50:
Collision Low Threshold: 10
{rtr-addr}
The Router (IP or CMG) address is in the form {slot:port} or {slot "profile-name"}.
slot
port
"profile-name"
Compact T1 - Release 6.1
show {rtr-addr} collision
show 5 "Adit50" collision
Sample Interval:
Collision High Threshold: 500
Slot number (1-6) that contains the Router card.
Port number of the Router is 1.
The profile name for the Router interface that is used to reach this
destination. Name must be enclosed in quotes, with a maximum
length of 11 characters.
15
CLI Commands
show
5-233
Advertisement
Table of Contents
