Set Up The Router Card - Black Box Compact T1 MT850A User Manual

Set Up the Router Card

The following is the basic setup, see the Adit Router User Manual or Quick Start
Guide for the following configuration setups:
l
l
l
l
l
l
Command
set {ds0-addr} type data
connect {slot:port:trunk}
{slot:port:channel}
set {router-addr} proxy
set {slot:port} up
telnet {router_card-addr}
Local and Remote Profile Setup
reinitialize
Compact T1 - Release 6.1
PPP Internet Connection and Public IP Address Routing
Frame Relay Internet Connection and Public IP Address Routing
Internet Connection using PPP, NAT/PAT and Firewall Filters
Internet Connection using NAT and Static NAT Addresses
PPP Internet Connection and Public IP Address Routing
Back-to-Back with PPP
Description
Confirm DS0 is set to type data.
ds0-addr = {slot:port:channel} of DS0
Example: set a:1:1-24 type data
Cross-connect T1 to router card.
Example: connect a:1:1-24 6:1:1 (router in slot 6)
Disable/enable router proxy.
router-addr = {slot:port}| of router card.
Example: set 6:1 proxy disable.
Set Router LAN as In-Service.
Example: set 6:1 up
Telnet to Router card.
router_card-addr = {slot} location of router card
Example: telnet 6 (if earlier than 3.0 release {slot:port}
must be used)
To enable any configuration changes, the card must be
reinitialized.
Configuration
Basic System Setup
4-7