Table of Contents
Advertisement
CLI Commands
set
set (router) stp bridge maxage
Use the set (router) stp bridge maxage command to configure Spanning Tree maximum
age value for the bridge. The bridge max age value specifies the maximum age of received
protocol information before it is discarded.
Syntax:
Example:
{rtr_card-addr}
The slot number (1-6) that contains the Router (IP or CMG) card.
{value}
The value can range from 6 to 40 seconds, with a default of 20.
set (router) stp bridge priority
Use the set (router) stp bridge priority command to configure Spanning Tree priority
value for the bridge.
Syntax:
Example:
{rtr_card-addr}
The slot number (1-6) that contains the Router (IP or CMG) card.
{value}
The value can range from 0 to 65535, with a default of 32768.
5-140
set {rtr_card-addr} stp bridge maxage {value}
set 3 stp bridge maxage 15
The example will set the Spanning Tree bridge max age to 15 seconds, on the
Router in slot 3.
set {rtr_card-addr} stp priority {value}
set 3 stp bridge priority 32768
The example will set the Spanning Tree bridge priority to 32768, on the Router
in slot 3.
Compact T1 - Release 6.1
Advertisement
Table of Contents
