set (router) password
Use the set (router) password command to manage password access on the Router card.
Syntax:
Example:
{rtr_card-addr}
The slot number (1-6) that contains the Router (IP or CMG) card.
{setting}
admin
config
security
view
{"password"}
A password with a maximum of 15 characters. Password must be enclosed in quotes, and
is case-sensitive.
Compact T1 - Release 6.1
set {rtr_card-addr} password {setting} {"password"}
set 5 password view "Fred"
The example sets the View password to "Fred" on the Router card in slot 5.
Set Administration level password on the Router.
Set Configuration level password on the Router.
Set Security level password on the Router.
Set View level password on the Router.
CLI Commands
set
5-129