Table of Contents
Advertisement
Configuration
Basic System Setup
Basic System Setup
Following is a quick reference to some of the common tasks in configuring the
Unit.
Initial Setup
Use the following commands for your initial setup, for further information see the
specific command listed in Chapter 5, CLI Commands .
Command
set local off
set date {mm/dd/yyyy}
set time {hh:mm:ss}
set id {"id-name"}
set clock1 {slot:port}
internal
set clock2 {slot:port}
internal
set ethernet ip address
{ip-addr} {mask}
set ip gateway {ip-addr}
4-4
Description
Disables DIP switches.
Set the date used for event logging
Set the time used for event logging
Set a system ID name
Set the primary clock source
Set the secondary clock source
Set the ethernet IP address, in the
conventional IP address format
Set the IP gateway, in the conventional IP
address format
Compact T1 - Release 6.1
Advertisement
Table of Contents
