CLI Commands
status
status (router) ipx server table
Use the status (router) ipx server table command to display the current table of learned IPX
Servers for the specified interface on the Router card.
Syntax:
Example:
> status 4 ipx server table
Total Entries-0 on 0 Ports
Display: <IPX Servers >
No Records to Display...
Example:
> status 5 ipx server table "Adit50"
Total Entries-0 on Local LAN
Display: <IPX Servers >
No Records to Display...
{rtr_card-addr}
The slot number (1-6) that contains the Router (IP or CMG) card.
["profile-name"]
The profile name for the Router interface that is used to reach this destination. Name must
be enclosed in quotes, with a maximum length of 11 characters.
5-272
status {rtr_card-addr} ipx server table
["profile-name"]
status 4 ipx server table
ROUTER BLADE IPX SERVERS REPORT Slot-4
Network
Hops Type Name
status 5 ipx server table "Adit50"
ROUTER BLADE IPX SERVERS REPORT Slot-5
Network
Hops Type Name
Learned From: <All Ports
Port Name
Learned From: <Local LAN >
Frame Type
>
Frame Type
Compact T1 - Release 6.1