Table of Contents
Advertisement
disconnect
disconnect
Remove a connection created using the connect command.
Syntax:
Example:
NOTE:
within a slot {slot:port}, or for specific channel {slot:port:channel}
{slot|slot:port|slot:port:channel|slot:port:trunk}
slot
port
channel
trunk
exit
Use the exit command to log out of the Command Line Interface (CLI).
Syntax:
Example:
Compact T1 - Release 6.1
disconnect
{slot|slot:port|slot:port:channel|slot:port:trunk}
disconnect A:2:1-24 3:1
Disconnects all 24 channels on port address #2 (DS1) on the controller card (slot
A) to port address #1 V.35 in slot 3.
The operator can remove connections for all of a slot {slot}, a port
A for the controller card, or 1 - 6 for service cards.
Port number or range.
Channel number or range, for T1 ports.
Trunk number for this port, 1-24.
exit
> exit
CLI Commands
disconnect
5-57
Advertisement
Table of Contents
