Table of Contents
Advertisement
show (router-lan)
The show (router-lan) command displays the settings for the Router card.
Syntax:
Example:
> show 4:1
SLOT 4:
Settings for RTR LAN 1:
LAN Collision Threshold Settings for LocalAdit:
LAN Spanning Tree Protocol Settings for LocalAdit:
Static IP Network Settings for LocalAdit:
Compact T1 - Release 6.1
show {rtr-addr}
show 4:1
Profile Name:
Up/Down:
Proxy:
Physical link:
MAC Address:
IP Settings:
IP Address and Mask:
Default Router:
Enabled Frame Types:
RIP Direction:
Secondary IP Addresses and Masks:
IPX Settings:
Enabled Frame Types:
RIP Direction:
802.2
Ext. Network:
Eth II Ext. Network:
SNAP
Ext. Network:
802.3
Ext. Network:
Other Settings:
Enabled Frame Types:
Sample Interval:
Collision High Threshold: 500
Collision Low Threshold:
Spanning Tree:
Total: 0
LocalAdit
UP
Disabled
Automatic
00:E0:97:01:E3:A2
192.168.3.193
192.168.3.202
Ethernet II
Send
192.168.1.1
None
Send
00000000
00000000
00000000
00000000
None
10
10
Disabled
CLI Commands
show
255.255.255.0
255.255.255.0
5-231
Advertisement
Table of Contents
