Table of Contents
Advertisement
CLI Commands
add
{dest-ip-addr/bits}
The destination IP Address and number of significant bits. The IP Address is in the form of
xxx.xxx.xxx.xxx, where xxx is between 0-255. The address "0.0.0.0/0" matches any
address.
dest-ip-addr
bits
{src-ip-addr/bits}
The destination IP address and number of significant bits. The address "0.0.0.0/0" matches
any address.
src-ip-addr
bits
5-22
Enter the IP Address of the local device or network that this rule will
affect. If you enter the address of a local device, this rule will affect
only the session establishments of the local device and the
destination address entered in the Remote IP Address/Network field,
below. The IP Address is in the form of xxx.xxx.xxx.xxx, where xxx
is between 0-255.
Use this field to identify the number of bits, from left to right that
will be used to match the IP Address field within the data packet.
Range is between 1-32.
Enter the IP Address of the local device or network that this rule will
affect. If you enter the address of a local device, this rule will affect
only the session establishments of the local device and the
destination address entered in the dest-ip-addr/bits command above.
The IP Address is in the form of xxx.xxx.xxx.xxx, where xxx is
between 0-255.
Use this field to identify the number of bits, from left to right that
will be used to match the IP Address field within the data packet.
Range is between 1-32.
Compact T1 - Release 6.1
Advertisement
Table of Contents
