Table of Contents
Advertisement
set (router) dns
Use the set (router) dns commands to set Domain Name Server (DNS) options.
set (router) dns domain
Use the set (router) dns domain command to set the default domain that the DNS resolver
will add to any name queries that are not fully qualified.
Syntax:
Example:
{rtr_card-addr}
The slot number (1-6) that contains the Router (IP or CMG) card.
{"domain-name"}
The domain name, with a maximum of 43 characters. Name must be enclosed in quotes.
set (router) dns name
Use the set (router) dns name command to set the Router card host name.
Syntax:
Example:
{rtr_card-addr}
The slot number (1-6) that contains the Router (IP or CMG) card.
{"host-name"}
The host name for the Router card. This name must be enclosed in quotes, with a maximum
of 15 characters.
Compact T1 - Release 6.1
set {rtr_card-addr} dns domain {domain-name"}
set 3 dns domain "mycompany.com"
The example will set the default domain to "mycompany.com" for the Router in
slot 3.
set {rtr_card-addr} dns name {"host-name"}
set 3 dns name "Adit25"
The example will set the Router card host name to "Adit25" for the Router in
slot 3.
CLI Commands
set
5-101
Advertisement
Table of Contents
