Table of Contents
Advertisement
CLI Commands
set
set syslog server facility
Use the set syslog server facility command to set the system log facility value.
Syntax:
Example:
{1|2|3}
The syslog server entry to modify.
{value}
Facility message 0-23, default is 16.
set syslog server level
Use the set syslog server level command to set the system log facility value.
Syntax:
Example:
{1|2|3}
The syslog server entry to modify.
{severity}
Severity threshold level, range 0-7.
set time
Use the set time command to set the time.
Syntax:
Example:
{hh:mm:ss}
Where hh:mm:ss is the time in hours, minutes, and seconds, using a 24-hour clock.
5-200
set syslog server {1|2|3} facility {value}
set syslog server 2 address 192.168.23.56
The example will set the IP address to be used to access syslog server 2 to
192.168.23.56.
set syslog server {1|2|3} level {severity}
set syslog server 2 address 192.168.23.56
The example will set the IP address to be used to access syslog server 2 to
192.168.23.56.
set time {hh:mm:ss}
set time 12:00:00
The example will set the time to 12 noon.
Compact T1 - Release 6.1
Advertisement
Table of Contents
