Set (Router-Lan) Ip Address - Black Box Compact T1 MT850A User Manual

CLI Commands
set

set (router-lan) ip address

Use the set (router-lan) ip address command to specify an IP address for the specified LAN
interface. When first installed the Router card's LAN interface has a default IP address of
10.0.0.1 with subnet mask of 255.0.0.0.
Syntax:
Example:
{rtr_lan-addr}
The Router (IP or CMG) address is in the form {slot:port} or {slot "profile-name"}.
slot
port
"profile-name"
{ip-addr}
The Router IP address, in the form of xxx.xxx.xxx.xxx, where xxx is between
0-255.
[mask]
The subnet mask, in the form of xxx.xxx.xxx.xxx, where xxx is between 0-255.
5-158
set {rtr_lan-addr} ip address {ip-addr} [mask]
set 3:1 ip address 192.168.202.244 255.255.255.0
The example will set the local LAN interface on slot 3 to IP address
192.168.202.244, with a subnet mask of 255.255.255.0.
Slot number (1-6) that contains the Router card.
Port number of the Router is 1.
The profile name for the Router interface. Name must be enclosed
in quotes, with a maximum length of 11 characters.
Compact T1 - Release 6.1