Table of Contents
Advertisement
Maintenance
Backup Controller Configuration
Load Controller Configuration
1. Open HyperTerm session with the Commpact T1 unit.
2. In HyperTerm, select File/Properties/Settings/ASCII Setup.
3. Set the Line delay to 300 ms and the Character delay to 5 ms.
4. Select OK to save ASCII Setup and OK to save HyperTerm Properties.
5. Select Transfer/Send Text File.
6. Select .txt file from previous steps.
7. Click Open.
8. Configuration will load.
16-8
Compact T1 - Release 6.1
Advertisement
Table of Contents
