Table of Contents
Advertisement
status (ds1)
Use the status (ds1) command to display the current status of the specified DS1.
Syntax:
Example:
SLOT A:
Status for DS1
{ds1-addr}
In the form of {slot:port}.
slot
port
[performance]
Display current performance statistics for the specified port or ports.
[history]
Display historical performance statistics for the specified port or ports.
Compact T1 - Release 6.1
status {ds1-addr} [performance] [history]
Where you can either specify a {slot:port} address to display an individual port
or range of ports.
> status a:1
1:
Receive:
Transmit:
Loopback:
A for the controller card, or 1-6 for service cards.
Port number or range.
Traffic
Traffic
OFF
CLI Commands
status
5-257
Advertisement
Table of Contents
