Table of Contents
Advertisement
CLI Commands
set
set (router) mgcp quarantine
The set (router) mgcp quarantine is a interoperability command to specify the default
quarantine handling method that the CMG will employ if the call agent has not sent an
explicit quarantine handling value in the last Request Notify message. This command
applies to the CMG Router card only.
Syntax:
Example:
{cmg_card-addr}
The slot number (1-6) that contains the CMG card.
{loop|step}
loop
step
{discard|process}
discard
process
set (router) mgcp report hookswitch
The set (router) mgcp report hookswitch is a interoperability command to specify wether
the hookswitch events (offhook, onhook and flashhook) will always be reported to the call
agent when they occur ("persistent event"), or whether an event request must be made by
the call agent first. This command applies to the CMG Router card only.
Syntax:
Example:
{cmg_card-addr}
The slot number (1-6) that contains the CMG card.
{always|onrequest}
always
onrequest
5-122
set {cmg_card-addr} mgcp quarantine {loop|step}
{discard|process}
set 1 mgcp quarantine loop process
The example sets the default quarantine method for the CMG card in slot 1.
Can generate multiple notifications to a request notify
Generate at most one notification to a request notify (Default)
Discard events that are in the quarantine buffer
Process events that are in the quarantine buffer (Default)
set {cmg_card-addr} mgcp report hookswitch
{always|onrequest}
set 1 mgcp report hookswitch onrequest
The example will set the MCGP hookswitch reporting mode to wait for a request
from the call agent, for the CMG card in slot 1.
Always report hookswitch events (Default)
Wait for a request from the call agent before reporting hookswitch events
Compact T1 - Release 6.1
Advertisement
Table of Contents
