set (router-wan) other
Use the set (router-wan) other command to set the traffic handling of protocols other than IP
or IPX on the specified WAN interface.
Syntax:
Example:
{rtr_card-addr}
The slot number (1-6) that contains the Router (IP or CMG) card.
{"wan-name"}
The WAN interface to modify. The name must be enclosed in quotes.
{block|bridge}
block
bridge
Compact T1 - Release 6.1
set {rtr_card-addr} {"wan-name"} other {block|bridge}
set 1 "LosAngeles" other bridge
The example will set the WAN interface named "LosAngeles" in slot 1, to
bridge other protocols.
Set the WAN to block protocols other than IP or IPX.
Set the WAN to bridge protocols other than IP or IPX.
CLI Commands
set
5-189