Set (Bri) Pmsync - Black Box Compact T1 MT850A User Manual

set (bri) pmsync

Use the set (bri) pmsync command to set the source for performance monitoring
synchronization.
Syntax:
Example:
{bri_card-addr}
The slot number (1-6) that contains the BRI card.
{internal|switch}
Set the operating mode to one of the following:
internal
switch
Compact T1 - Release 6.1
set {bri_card-addr} pmsync {internal|switch}
set 4 pmsync internal
To set the performance monitoring source to internal for the BRI in slot 4.
Set source to the internal to the system
Set source to the switch
CLI Commands
set
5-73