Set (Router-Wan) Stp - Black Box Compact T1 MT850A User Manual

set (router-wan) stp

Use the set (router-wan) stp commands to configure the Spanning Tree Protocol on the
specified WAN interface.
set (router-wan) stp enable/disable
Use the set (router-wan) stp enable/disable command to enable and disable Spanning
Tree Protocol on this interface. To enable Spanning Tree on an interface it must first be
enabled globally with the set (router) stp enable command and the WAN must be set to
bridge the IP protocol.
Syntax:
Example:
{rtr_card-addr}
The slot number (1-6) that contains the Router (IP or CMG) card.
{"wan-name"}
The WAN interface to modify. The name must be enclosed in quotes.
{disable|enable}
disable
enable
Compact T1 - Release 6.1
set {rtr_card-addr} {"wan-name"} stp {disable|enable}
set 3 stp enable
The example will enable Spanning Tree on this interface.
Disable Spanning Tree on this interface.
Enable Spanning Tree on this interface.
CLI Commands
set
5-193