Set (Router-Trunk) Up/Down - Black Box Compact T1 MT850A User Manual

set (router-trunk) up/down

Use the set (router-trunk) up/down command to set the WAN trunk up or down. When the
Router trunk is set down a link failure will not cause an alarm. This can be used to eliminate
alarms from Router trunks that are not in-use. When the Router trunk is set up, a link failure on
the WAN trunk will cause an alarm to be reported to the Adit.
Syntax:
Example:
{rtr-trunk-addr}
In the form {slot:port:trunk}.
slot
port
trunk
{up|down}
down
up
Compact T1 - Release 6.1
set {rtr-trunk-addr} {down|up}
set 2:1:1 down
The example will set the first Router trunk interface on slot 2 down.
Slot number (1-6) of the Adit that contains the Router (IP or CMG) card.
Port number of the Router is 1.
Trunk number for this port, 1-24.
Set the WAN down.
Set the WAN up.
CLI Commands
set
5-167