Connect (Router-Voice) (T1|Fxs) - Black Box Compact T1 MT850A User Manual

CLI Commands
connect

connect (router-voice) (t1|fxs)

Use the connect (router-voice) (t1|fxs) command to create two-way connections between the
CMG voice channels and DS0 channels of an FXS or T1 service card or controller T1. The
CMG only supports connections between CMG voice channels and FXS or T1 DS0s utilizing
loop start signaling.
Syntax:
Example:
{cmg_voice-addr}
In the form {slot:voip:port}
slot
voip
channel
{slot:port|slot:port:channel}
slot
port
channel
5-40
connect {cmg_voice-addr}
{slot:port|slot:port:channel}
Use the disconnect command to delete connections.
connect A:2:1-12 5:1:1:1-12
Connects 12 channels on port address #2 (DS1) on the controller card (slot A)
to the first 12 voice channels on the CMG in slot 5.
The slot number (1-6) that contains the CMG card.
To designate VoIP 1:1 is used.
Channel number for the router is 1-48, range or all
A for the controller card, or 1 - 6 for service cards.
Port number or range (port must be a T1).
Channel number or range, for T1 ports.
Compact T1 - Release 6.1