Table of Contents
Advertisement
show (fxs5G)
The show (fxs5G) command displays the settings for the FXS 5G card.
Syntax:
Example:
Example:
Note: Wink time displays only when signaling is set to GSW or GSWRB.
{fxs5G-addr}
In the form of {slot} or {slot:port}. Note if only slot is listed, all ports will be displayed.
slot
port
Compact T1 - Release 6.1
show {fxs5G-addr}
show 6:1
This command will display the settings for the FXS channel 1 for the FXS 5G
card located in Slot 6.
> show 6:1
SLOT 6:
Settings for FXS:
Type:
Signaling:
RxGain:
TxGain:
Impedance:
show 4:1
SLOT 4:
Settings for FXS:
Type:
Signaling:
RxGain:
TxGain:
Impedance:
Wink time:
Location of the FXS 5G card, slot 1 - 6
Port number, range or "all".
channel
1:
VOICE
LS
-6
dB
-3
dB
900 Ohms + 2.16uF
channel
1:
VOICE
GSW
-6
dB
-3
dB
900 Ohms + 2.16uF
135 ms
CLI Commands
show
5-213
Advertisement
Table of Contents
