Status (Router) Ip Network Table - Black Box Compact T1 MT850A User Manual

CLI Commands
status

status (router) ip network table

Use the status (router) ip network table command to display the current table of learned IP
Networks for the specified interface on the Router card.
Syntax:
Example:
> status 5 ip network table
ROUTER BLADE IP NETWORKS REPORT Slot-5
Total Entries-3 on 2 Ports
Display: <IP Networks >
Network
1. Static 200.1.1.0
2. Static 100.0.0.0
3. Direct 192.168.3.0
Example:
> status 5 ip network table "Adit50"
ROUTER BLADE IP NETWORKS REPORT Slot-5
Total Entries-2 on Local LAN
Display: <IP Networks >
Network
1. Static 100.0.0.0
2. Direct 192.168.3.0
{rtr_card-addr}
The slot number (1-6) that contains the Router (IP or CMG) card.
["profile-name"]
The profile name for the Router interface that is used to reach this destination. Name must
be enclosed in quotes, with a maximum length of 11 characters.
5-270
status {rtr_card-addr} ip network table
["profile-name"]
status 5 ip network table
Learned From: <All Ports
Subnet Mask
255.255.255.0
255.0.0.0
255.255.255.0
status 5 ip network table "Adit50"
Learned From: <Local LAN >
Subnet Mask
255.0.0.0
255.255.255.0
>
Metric Next Gateway
1
1 192.136.43.52
1 192.168.3.196
Metric Next Gateway
1 192.136.43.52
1 192.168.3.196
Compact T1 - Release 6.1
Port Name
LosAngeles
Local LAN
Local LAN
Frame
Eth II
Eth II