Table of Contents
Advertisement
CLI Commands
clear
clear (ds1)
Use the clear (ds1) command to clear specified DS1 performance data.
Syntax:
Example:
{ds1-addr}
DS1 address in the format {slot:port}.
slot
port
{setting}
all
bes
css
dm
es
lcv
les
pcv
sefs
ses
uas
clear log
Use the clear log command to clear the event log. This will clear the log without asking for
confirmation.
Syntax:
5-32
clear {ds1-addr} performance {setting}
clear a:1 performance all
Clears all performance data on DS1 1 (port 1) on the Controller card (slot A).
A for the controller card, or 1-6 for service cards.
Port number range or all.
Clear all performance data
Clear bes (bursty errored seconds) performance data.
Clear css (controlled slip seconds) performance data.
Clear dm (degraded minutes) performance data.
Clear es (errored seconds) performance data.
Clear lcv (line code violations) performance data.
Clear les (line errored seconds) performance data.
Clear pcv (path code violations) performance data.
Clear sefs (severely errored frame seconds) performance data.
Clear ses (severely errored seconds) performance data.
Clear uas (unavailable seconds) performance data.
clear log
Compact T1 - Release 6.1
Advertisement
Table of Contents
