Black Box Compact T1 MT850A User Manual page 205

set (router) mgcp protocolid
Use the set (router) mgcp protocolid command to configure a global protocol ID string
which will override the default protocol ID string used in MGCP command lines. This
command applies to the CMG Router card only.
Syntax:
Example:
{cmg_card-addr}
The slot number (1-6) that contains the CMG Router card.
{default|"id-name"}
default
"id-name" Override the default protocol ID string with this string. Identifier of up to
If the protocol ID setting is set to "default" or the null string (""), then the following default
strings will be used depending on the configured MGCP version.
MGCP Version
ietf10
ietf01
ncs
Compact T1 - Release 6.1
set {cmg_card-addr} mgcp protocolid {default|
"id-name"}
set 1 mgcp protocolid "MGCP 1.0 CACS"
The example will set the protocol ID string to "MGCP 1.0 CACS".
Use the default protocol ID string
20 characters, enclosed in quotes.
Default Protocol ID
MGCP 1.0
MGCP 0.1
MGCP 0.1 NCS 1.0
CLI Commands
set
5-121