Black Box Compact T1 MT850A User Manual page 222

CLI Commands
set
set (router) snmp name
Use the set (router) snmp name command to set the value of sysName on the specified
Router card.
Syntax:
Example:
{rtr_card-addr}
The slot number (1-6) that contains the Router (IP or CMG) card.
{"system-name"}
The value of sysName, with a maximum of 64 ASCII characters. Name must be enclosed
in quotes.
5-138
set {rtr_card-addr} snmp name {"system-name"}
set 1 snmp name "AditRouters"
The example will set the value of sysName on the Router card in slot 1 to
"AditRouters".
Compact T1 - Release 6.1