Set (Ocudp) Loopback - Black Box Compact T1 MT850A User Manual

set (ocudp) loopback

Use the set (ocudp) loopback command to manually set OCU/CSU loopback tests.
Syntax:
Example:
{ocudp-addr}
The {slot:port} address of the OCU-DP card you want to apply the changes to.
slot
port
{csu|ocu}
csu
ocu
{loopdown|loopup}
loopdown*
loopup
Compact T1 - Release 6.1
set {ocudp-addr} loopback {csu|ocu} {loopdown|loopup}
set 3:2 loopback csu loopdown
Slot number (1-6) where the OCU-DP is located
Port number or range.
Set CSU manual loopback tests
Set OCU manual loopback tests
Stop CSU/OCU manual loopback test (Default).
Start CSU/OCU manual loopback test
CLI Commands
set
5-87