Table of Contents
Advertisement
Physical Installation
Unpacking and Inspection
Unpacking and Inspection
WARNING!
DEVICES
1. Inspect containers for damage during shipment. Report any damage to the
freight carrier for possible insurance claims.
2. Compare packing list with office records. Report any discrepancies to the
office.
3. Open shipping containers, be careful not to damage contents.
4. Inspect contents and report any damage.
5. If equipment must be returned for any reason, carefully repack equipment in
the original shipping container with original packing materials if possible.
6. If equipment is to be installed later, replace equipment in original shipping
container and store in a safe place until ready to install.
Installation Environment
The environment in which you are installing the unit must meet the following
conditions:
l
Operating temperature range: 32 to 104 F (0 to 40 C)
l
Storage temperature range: -40 to 158 F (-40 to 70 C)
l
Cooling method is by free air convection, requires long axis of unit to be mounted
horizontally
l
Maximum operating altitude: 10,000 ft. (3,048 m)
l
Maximum non-operating altitude: 40,000 ft. (12,192 m)
l
Relative humidity (non-condensing) range: 0 to 95%
For operation outside the defined environment requirements, the unit must be placed in
an environmentally controlled enclosure.
2-2
O
BSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC
.
Compact T1 - Release 6.1
Advertisement
Table of Contents
