Table of Contents
Advertisement
show (router-voice)
The show (router-voice) command displays the CMG voice line provisioning. This command
applies to the CMG Router card only.
Syntax:
Example:
SLOT 4:
Voice Channel Settings for CMG:
{cmg_voice-addr}
In the form {slot:voip:port}
slot
voip
channel
Compact T1 - Release 6.1
show {cmg_voice-addr}
show 4:1:1:1
Voice Channel:
MGCP Endpoint ID:
Channel Status:
Echo Cancellation:
Echo Tail (milliseconds):
Receive Gain (dB):
Transmit Gain (dB):
VoIP Algorithm Pref. Order:
Silence Suppression:
Type of Service (TOS) Byte:
Channel Use for Fax Relay:
Slot number (1-6) that contains the CMG card.
To designate VoIP 1:1 is used.
Channel number for the router is 1-48, range or all
CLI Commands
1
aaln/1
Up
Enabled
16
-1
-1
g711mu
Disabled
5
Nonreserved
show
5-239
Advertisement
Table of Contents
