Set Up Security
Use the following commands to set up the security on the Unit. See the set user
command for details.
Command
set user {"user-name"}
level {1-3}
set user {"user-name"}
password
Set Up a DS1/T1
Use the following commands to set up a DS1. See the set (ds1) command for more
details.
Command
set {ds1-addr} up
set {ds1-addr} id
{"id-string"}
set {ds1-addr} lbo {1 - 9}
set {ds1-addr} linecode
{ami|b8zs}
set {ds1-addr} framing
{d4|esf|tr8afdl|tr8anofdl|
tr8b}
set {ds1-addr} loopdetect
{on|off}
Compact T1 - Release 6.1
Description
Specify the user name and the security level
Set a password for the user
Description
Activate the port of the DS1 (slot:port)
Set the identification string
Set the line buildout value for the DS1
Set the linecode for the DS1
Set the framing option for the DS1
Set the detection/reaction to CSU loopcodes
Configuration
Basic System Setup
4-5