Black Box Compact T1 MT850A User Manual page 246

CLI Commands
set
set (router-lan) rip ipx
Use the set (router-lan) rip ipx command to specify the IPX RIP and SAP for the specified
LAN interface.
Syntax:
Example:
{rtr_lan-addr}
The Router (IP or CMG) address is in the form {slot:port} or {slot "profile-name"}.
slot
port
"profile-name"
{both|neither|recv|send}
both
neither
recv
send
5-162
set {rtr_lan-addr} rip ipx {both|neither|recv|send}
set 2:1 rip ipx send
The example will set RIP and SAP on the local LAN interface on slot 2 to send.
The slot number (1-6) that contains the Router card.
Port number of the Router is 1.
The profile name for the Router interface. Name must be enclosed
in quotes, with a maximum length of 11 characters.
Enable IP RIP (or IPX RIP and SAP) in both directions.
Shut IP RIP (or IPX RIP and SAP) off completely.
Enable IP RIP (or IPX RIP and SAP) in the receive direction only.
Enable IP RIP (or IPX RIP and SAP) in the send direction.
Compact T1 - Release 6.1