CLI Commands
set
set (router-wan) rip
Use the set (router-wan) rip command to set the type of RIP updates on the specified interface.
set (router-wan) rip ip updates
Use the set (router-wan) rip ip updates command to set the type of RIP updates on the
specified WAN interface.
Syntax:
Example:
{rtr_card-addr}
The slot number (1-6) that contains the Router (IP or CMG) card.
{"wan-name"}
The WAN interface to modify. The name must be enclosed in quotes.
{setting}
never
periodic
triggered
set (router-wan) rip ipx updates
Use the set (router-wan) rip ipx updates command to set the type of IPX RIP updates on
the specified WAN interface.
Syntax:
Example:
{rtr_card-addr} The slot number (1-6) that contains the Router (IP or CMG) card.
{"wan-name"} The WAN interface to modify. The name must be enclosed in quotes.
{setting}
never
periodic
triggered
5-192
set {rtr_card-addr} {"wan-name"} rip ip updates
{never|periodic|triggered}
set 1 "LosAngeles" rip ip updates never
The example will set the WAN interface named "LosAngeles" on the Router in
slot 1 to not sent RIP updates.
Set the WAN to not send RIP updates.
Set the WAN to send periodic RIP updates.
Set the WAN to send triggered RIP updates.
set {rtr_card-addr} {"wan-name"} rip ipx updates
{never|periodic|triggered}
set 1 "LosAngeles" rip ipx updates never
Sets the WAN interface "LosAngeles" to not sent RIP updates.
Set the WAN to not send RIP updates.
Set the WAN to send periodic RIP updates.
Set the WAN to send triggered RIP updates.
Compact T1 - Release 6.1