Table of Contents
Advertisement
CLI Commands
install
install
install (slot) router
The Compact T1 Controller card automatically creates a backup of the configuration of any
Router cards in their respective slot. If a Router is removed and replaced with a another Router
(same type) the backup of the configuration from the first occupying Router card is loaded onto
the replacing Router card. This command will stop this function and the replacing Router will
retain its configuration.
Syntax:
Example:
{slot}
The slot number (1 - 6) of the card to download the software file to.
{cmg|router}
cmg
router
To replace a router card in slot 5 and retain its loaded configuration file:
1. Remove current router card in slot 5 of the system.
2.
With the CLI command enter:
3.
When an "ok" is displayed the replacement router card may be inserted into
slot 5.
5-58
install {slot} {cmg|router}
install 5 router
Install a CMG Router card.
Install a IP Router card.
> install 5 router
ok
Compact T1 - Release 6.1
Advertisement
Table of Contents
