Set (Router-Voice) Dtmfrelay; Set (Router-Voice) Echo Cancellation - Black Box Compact T1 MT850A User Manual

set (router-voice) dtmfrelay

Use the set (router-voice) dtmfrelay command to enable or disable the relay of DTMF packets
as per RFC 2833. This command applies to the CMG Router card only.
Syntax:
Example:
{cmg_voice-addr}
In the form {slot:voip:port}
slot
voip
channel
{disable|enable}
disable
enable

set (router-voice) echo cancellation

Use the set (router-voice) echo cancellation command to enable/disable echo cancellation as
the default for voice calls for one or more voice channels. The new default set by this command
may be overridden on a call-by-call basis by the MGCP call agent. At the end of a call, the
configured default is back in-force. This command applies to the CMG Router card only.
Syntax:
Example:
{cmg_voice-addr}
In the form {slot:voip:port}
slot
voip
channel
{disable|enable}
disable
enable
Compact T1 - Release 6.1
set {cmg_voice-addr} dtmfrelay {disable|enable}
set 2:1:1:7 dtmfrelay enable
Enables DTMF relay on voice channel 7 on the CMG card in slot 2.
The slot number (1-6) that contains the CMG card.
To designate VoIP 1:1 is used.
Channel number for the router is 1-48, range or all
Disable DTMF relay as the default for voice calls (Default)
Enable DTMF relay as the default for voice calls
set {cmg_voice-addr} echo cancellation
{disable|enable}
set 2:1:1:7 echo cancellation disable
Disables echo cancellation as the default for calls on voice channel 7, on the
CMG card in slot 2.
The slot number (1-6) that contains the CMG card.
To designate VoIP 1:1 is used.
Channel number for the router is 1-48, range or all
Disable echo cancellation as the default for voice calls
Enable echo cancellation as the default for voice calls (Default)
CLI Commands
set
5-173