Card Configuration; Cli Commands - Black Box Compact T1 MT850A User Manual

Router (IP) Card

Card Configuration

Card Configuration
The IP Router has the option of configuration through CLI or the Router menu-driven
user interface, which is accessed through Telnet. The following CLI commands are all
Router related. For information on the IP Router menu-driven user interface, see the IP
Router User Manual.
NOTE:

CLI Commands

For detailed information on the following Router commands, see Chapter 5, CLI
Commands.
l
add (router) dns proxy
Enable DNS proxy and add a remote DNS server address to the router card
l
add (router) remote
Add a remote WAN profile to the WAN profile table
l
add (router) snmp community
Add a SNMP community to an interface on the router card
l
add (router) snmp trap
To specify a destination to send SNMP trap messages
l
add (router) uploaduser
To specify a host that is allowed to upload configuration/software files
l
add (router-lan) filter
Add address filters (address, custom, protocol) to the table of Layer 2 filters
applied to the specified LAN interface
l
add (router-lan) static
Add static elements on the specific LAN interface (IP address, IP network,
IPX network, MAC address).
l
add (router-wan) firewall
Add a firewall rule to a WAN.
l
add (router-wan) gre network
Add a "by network" GRE tunnel to a WAN.
13-8
The default IP address for the IP Router is 10.0.0.1.
Compact T1 - Release 6.1