Status (Router) Ipx Network Table - Black Box Compact T1 MT850A User Manual

status (router) ipx network table

Use the status (router) ipx network table command to display the current table of learned IPX
Networks for the specified interface on the Router card.
Syntax:
Example:
> status 5 ipx network table
Total Entries-4 on 1 Ports
Display: <IPX Networks>
1. Static 00000011 2
2. Static 00000011 2
3. Static 00000011 2
4. Static 00000011 2
Example:
> status 5 ipx network table "Adit50"
Total Entries-0 on Local LAN
Display: <IPX Networks>
No Records to Display...
{rtr_card-addr}
The slot number (1-6) that contains the Router (IP or CMG) card.
["profile-name"]
The profile name for the Router interface that is used to reach this destination. Name must
be enclosed in quotes, with a maximum length of 11 characters.
Compact T1 - Release 6.1
status {rtr_card-addr} ipx network table
["profile-name"]
status 5 ipx network table
ROUTER BLADE IPX NETWORKS REPORT Slot-5
Network Hops Ticks Next IPX Router
status 5 ipx network table "Adit50"
ROUTER BLADE IPX NETWORKS REPORT Slot-5
Network Hops Ticks
Learned From: <All Ports
4
4
4
4
Learned From: <Local LAN >
Next IPX Router
CLI Commands
status
>
Port Name Frame Type
LosAngeles 802.3
LosAngeles 802.2
LosAngeles
LosAngeles Eth II
Frame Type
5-271
SNAP