Card Configuration
BRI card options are set with the Command Line Interface (CLI). For additional
information on these commands, see Chapter 5, CLI Commands.
CLI Commands
l
connect
Creates two-way connections between channels
l
disconnect
Removes a connection created by the connect command
l
set (bri)
Setup of ISDN ports (up/down, threshold, call reference value)
l
set (bri) autoactivate
Set up the ISDN circuits when the FDL link cannot be used
l
set (bri) mode
Set up ISDN cards mode of operation (3-DS0)
l
set (bri) pmsync
Set up the BRI card source for performance monitoring synchronization
l
set (ds0)
For cross-connect to ISDN, must be data type
l
status (ds1)
Displays line status or performance statistics of a specific DS1
l
set clock
Set the primary and secondary (clock1/clock2) master transmit clock source
l
show (bri)
Displays BRI port configuration
l
show clock
Displays actual clock source
l
show (ds1)
Displays DS1 configuration
l
status (bri)
Displays port status or performance statistics for the specified BRI
l
status clock
Displays actual clock status and source
Compact T1 - Release 6.1
ISDN BRI Card
Card Configuration
9-7