Table of Contents
Advertisement
set (router) mgcp tos
Use the set (router) mgcp tos command to configure the IP TOS byte value to be sent in
each transmitted MGCP packet. This command takes effect immediately.
Syntax:
Example:
{cmg_card-addr}
The slot number (1-6) that contains the CMG card.
{value}
IP TOS byte value, in the format of 0x (2 hex digits). Default setting is 0.
The following table contains the appropriate TOS value for various IP precedence and
Diffuser Code points:
IP Precedence
IP Precedence = 0
IP Precedence = 1
IP Precedence = 2
IP Precedence = 3
IP Precedence = 4
IP Precedence = 5
IP Precedence = 6
IP Precedence = 7
Compact T1 - Release 6.1
set {cmg_card-addr} mgcp tos {value}
set 1 mgcp tos 0x28
The example will set the IP TOS value to 0x28 on the CMG in slot 1.
TOS
0x00
0x20
0x40
0x60
0x80
0xA0
0xC0
0xE0
CLI Commands
Diffuser Codepoint
EF
= 101110
AF11 = 001010
AF12 = 001100
AF13 = 001110
AF21 = 010010
AF22 = 010100
AF23 = 010110
AF31 = 011010
AF32 = 011100
AF33 = 011110
AF31 = 100010
AF32 = 100100
AF33 = 100110
set
TOS
0xB8
0x28
0x30
0x38
0x48
0x50
0x58
0x68
0x70
0x78
0x88
0x90
0x98
5-125
Advertisement
Table of Contents
