Table of Contents
Advertisement
l
set (router-wan) dlci
Configure the DLCI for a specified WAN interface that will be using a frame
relay encapsulated trunk
l
set (router-wan) gre
Configure the GRE tunneling for a specified WAN interface
l
set (router-wan) ip
Set the IP traffic handling on the WAN interface
l
set (router-wan) ip address
Set the IP address for a WAN interface
l
set (router-wan) ipx
Set the IPX traffic handling on the specified WAN interface
l
set (router-wan) nat
Configure Network Address Translation (NAT) on a specified WAN
interface
l
set (router-wan) other
Set the traffic handling of protocols other than IP or IPX on the specified
WAN interface
l
set (router-wan) ppp
Configure the PPP (Point-to-Point Protocol) on the specified router card
l
set (router-wan) rip
Set the type or RIP updates on the WAN interface
l
set (router-wan) stp
Configure the Spanning Tree Protocol on the specified WAN
l
set (router-wan) trunk
Configure the trunk port for a specified WAN interface
l
set (router-wan) up/down
Set the specified WAN interface up or down
l
show (router)
Displays the current Router settings
l
show (router) dhcp
Displays the current DHCP settings for the Router
l
show (router) dns
Displays the current DNS setup for the router card
Compact T1 - Release 6.1
Router (CMG) Card
Card Configuration
14-15
Advertisement
Table of Contents
