Table of Contents
Advertisement
CLI Commands
status
status (router) events
Use the status (router) events command to display the current event log from the specified
Router card.
Syntax:
Example:
Time
Jan 10
Jan 10
Jan 10
Jan 10
Jan 10
Jan 10
Jan 10
Jan 10
Jan 10
Jan 10
Jan 10
Jan 10
Jan 10
Jan 10
Jan 10
Jan
Jan
Jan
Jan
Jan
Jan 9 23:28:35.5 Download config.cfg by Controller
{rtr_card-addr}
The slot number (1-6) that contains the Router (IP or CMG) card.
5-268
status {rtr_card-addr} events
status 5 events
ROUTER BLADE EVENTS LOG REPORT Slot-5
Message
0:56:44.8 Download EVE.RPT by Controller
0:54:27.4 Download complete in 0.0 secs [17440 bps]
0:54:27.4 Download ALM.RPT by Controller
0:14:23.5 ADMIN login terminated
0:14:21.8 Download complete in 0.1 secs [61600 bps]
0:14:21.7 Download config.cfg by Controller
0:14:21.6 Send CFG Change Notice to Controller - PASS
0:14:20.7 NVRAM Flash Task Wakeup Event Sent
0:10:56.5 Login accepted at ADMIN level
0:03:29.9 ADMIN login terminated
0:03:28.5 Download complete in 0.1 secs [60880 bps]
0:03:28.4 Download config.cfg by Controller
0:03:28.3 Send CFG Change Notice to Controller - PASS
0:03:27.4 NVRAM Flash Task Wakeup Event Sent
0:02:48.7 Login accepted at ADMIN level
9 23:29:34.5 Download complete in 0.1 secs [60160 bps]
9 23:29:34.3 Download config.cfg by Controller
9 23:29:34.3 Send CFG Change Notice to Controller - PASS
9 23:29:33.4 NVRAM Flash Task Wakeup Event Sent
9 23:28:35.7 Download complete in 0.1 secs [60000 bps]
Count
Compact T1 - Release 6.1
Advertisement
Table of Contents
