Set Up A V.35 Port; Change The Ip Address Of The Ds0 Management Channel - Black Box Compact T1 MT850A User Manual

Configuration
Basic System Setup

Set Up a V.35 Port

Use the following commands to set up a V.35 port. See the set (v35) command for
details.
Command
set {slot:port} cts
{cd|high|low|rts}
set {slot:port} data
{invert|normal}
set {slot:port} clock
{source|external}
set {slot:port} speed
{56K|64K}
set {slot:port} txclkinv
{invert|normal}
set {slot:port} rxclkinv
{invert|normal}

Change the IP Address of the DS0 Management Channel

Use the following commands to change the IP over DS0 Management Channel for the
Unit.
Command
set ipds0 down
set ipds0 ip address
{ip-addr}
set ipds0 up
4-10
Description
Set the Clear to Send operation mode
Set the data mode
Set the clock mode
Set the speed
Set the transmit clock inversion mode
Set the receive clock inversion mode
Description
Set the DS0 management channel down
Set the DS0 management channel IP
address.
Set the DS0 management channel up
Compact T1 - Release 6.1