Provision Ds0S For Data And Cross-Connect To The Outgoing T1; Configure The Router - Black Box Compact T1 MT850A User Manual

Provision DS0s for data and cross-connect to the
outgoing T1
Command
disconnect a
set a:1:all type data
set a:2:all type data
connect a:1:1-4 a:2:1-4
connect a:1:6-9 a:2:6-9
connect a:1:11-14 a:2:11-14
connect a:1:15-19 a:2:16-19
connect a:1:21-24 a:2:21-24

Configure the Router

Command
set 6 default
add 6 snmp trap "public"
192.168.0.254 "LocalUnit"
set 6:1 ip address
192.168.0.1 255.255.255.0
set 6 lmi disable
connect a:2:5 6:1:1
Compact T1 - Release 6.1
Setup of DS0 Management Channel
Description
Disconnects all connections to slot a (controller)
Sets all DS0s on T1-1 to data signaling type
Sets all DS0s on T1-2 to data signaling type
Connects first four DS0s of T1-1 of the controller to
first four DS0s of T1-2.
Connects DS0s 6-9 of T1-1 of the controller to
DS0s 6-9 of T1-2.
Connects DS0s 11-14 of T1-1 of the controller to
DS0s 11-14 of T1-2.
Connects DS0s 16-19 of T1-1 of the controller to
DS0s 16-19 of T1-2.
Connects DS0s 21-24 of T1-1 of the controller to
DS0s 21-24 of T1-2.
Description
Sets the Router in slot 6 to it's default settings
Configure the Router card trap address
Configure the LAN IP address
Disable PVC management for Frame Relay connections
Connect the timeslot to the WAN port.
Configuration
4-17