Set (Router-Voice) Log Start; Set (Router-Voice) Log Stop - Black Box Compact T1 MT850A User Manual

set (router-voice) log start

Use the set (router-voice) log start command to start logging events to the CMG text log, for
the particular voice channels specified. Events are currently of two types, errors and MGCP.
This command does not clear the log before enabling new events. The events to be logged are
defined separately for each voice channel. (ie: one may start error logging for all channels, then
set error plus MGCP logging for one specific channel). This command applies to the CMG
Router card only.
Syntax:
Example:
{cmg_voice-addr}
In the form {slot:voip:port}
slot
voip
channel
{both|errors|mgcp}
both
errors
mgcp

set (router-voice) log stop

Use the set (router-voice) log stop command to stop logging events to the CMG text log, for
the particular voice channel(s) specified. This command applies to the CMG Router card only.
Syntax:
Example:
{cmg_voice-addr}
Definition is same as above.
Compact T1 - Release 6.1
set {cmg_voice-addr} log start {both|errors|mgcp}
set 2:1:1:8 log start both
The example will start logging errors MGCP for channel 8 on the CMG card in
slot 2.
The slot number (1-6) that contains the CMG card.
To designate VoIP 1:1 is used.
Channel number for the router is 1-48, range or all
Record MGCP protocol events and errors
Record protocol and other errors only
Record MGCP protocol events only
set {cmg_voice-addr} log stop
set 2:1:1:8 log stop
The example will stop logging for channel 8 on the CMG card in slot 2.
CLI Commands
set
5-177