Table of Contents
Advertisement
CLI Commands
show
show local
The show local command shows whether the Compact T1 is in local mode.
Syntax:
Example:
> show local
LOCAL:
show login
The show login command displays the RADIUS login authentication configuration settings for
the Controller.
Syntax:
Example:
> show login
Login Authentication Parameters:
Authentication Type: local
Support Logins: enabled
show ntp
The show ntp command displays the configuration settings for the Controller NTP client.
Syntax:
Example:
> show ntp
NTP Settings:
5-216
show local
show local
ON
show login
show login
show ntp
show ntp
NTP:
NTP Server Address:
NTP Polling Interval (seconds): 16
NTP Timezone (offset from GMT): 0 hours 0 minutes
Disabled
0.0.0.0
Compact T1 - Release 6.1
Advertisement
Table of Contents
