CLI Commands
show
show date
The show date command displays the date in dd/mm/yyyy format.
Example:
show (ds0)
The show (ds0) command displays settings for DS0s.
Syntax:
Example:
>show a:2:1-2
SLOT A:
Settings for DS1
SLOT A:
Settings for DS1
{ds0-addr}
In the form {slot:port:channel}.
slot
port
channel
5-210
show date
> show date
date: 08/10/2002
show {ds0-addr}
show a:2:1-2
In the following example, the show (ds0) command has queried slot A
(Controller card), port 2, channels 1 through 2.
2:
Type:
2:
Type:
A for the controller card, or 1 - 6 for service cards.
Port number or range.
Channel number, range or all.
channel
1:
DATA
channel
2:
DATA
Compact T1 - Release 6.1