Table of Contents
Advertisement
CLI Commands
delete
delete (router-lan) secondary ip address
Use the delete (router-lan) secondary ip address command to delete a secondary IP address
and subnet to the specified LAN interface.
Syntax:
Example:
{rtr_lan-addr}
The Router (IP or CMG) address is in the form {slot:port} or {slot "profile-name"}.
slot
port
"profile-name" The profile name for the Router interface. Name must be enclosed in
{ip-addr [mask]|ip-addr/bits}
ip-addr
mask
bits
5-46
delete {rtr_lan-addr} secondary ip address
{ip-addr [mask]|ip-addr/bits}
delete 4:1 secondary ip address 192.168.1.1
The example will delete a secondary IP address of 192.168.1.1.
The slot number (1-6) that contains the Router card
Port number of the Router is 1
quotes, with a maximum length of 11 characters
The IP address of a current secondary IP address, in the form of
xxx.xxx.xxx.xxx, where xxx is between 0-255.
The mask of the secondary IP address, in the form of
xxx.xxx.xxx.xxx, where xxx is between 0-255
The subnet mask, specified as the number of ones bits in the mask
value. Range is between 1-32.
Compact T1 - Release 6.1
Advertisement
Table of Contents
