Table of Contents
Advertisement
status (router)
Use the status (router) command to display the current Router status information.
Syntax:
Example:
SLOT 5:
Status for RTR Port 1:
{rtr-addr}
The Router (IP or CMG) address is in the form {slot:port}.
slot
port
status (router) alarms
Use the status (router) alarms command to display the current alarm log from the specified
Router card.
Syntax:
Example:
Time
Jan
{rtr_card-addr}
The slot number (1-6) that contains the Router (IP or CMG) card.
Compact T1 - Release 6.1
status {rtr-addr}
status 5:1
The example displays status of the Router card in slot 5.
Run Status:
Collision Alarm:
Link Alarm:
Alarm LED:
10/100 LED:
Link LED:
Collision LED:
Transmit LED:
Receive LED:
Slot number (1-6) that contains the Router card.
Port number of the Router is 1.
status {rtr_card-addr} alarms
status 5 alarms
ROUTER BLADE ALARM LOG REPORT Slot-5
Message
4 22:26:47.0 Ethernet Link 5:1 Down.
Running
NO
NO
Red
Off
Off
Off
Off
Off
CLI Commands
status
Count
5-265
Advertisement
Table of Contents
